How to make Bag Zipper

Apr 28,2023 | QLQ zipper solution supplier

For different bags, the zipper materials will be different, it will depend on the client's needs. For example, we can use Metal zipper, Plastic zipper, Nylon zipper and so on.

 
Metal Closed-end Finished Zipper

1-Metal Open-end Finished zipper

2-Plastic Closed-end Finished Zipper

2-Plastic Open-end Finished zipper

3-Nylon Closed-end Finished Zipper

3-Nylon Open-end Finished zipper

Nylon Zipper Manufacturing For Bag

Nylon Zipper Manufacturing for Children Clothes

Zipper Cutting and Slider Mounting

Advantages:

1. This machine could mount Nylon zipper sliders free of gapping vacancy, saving materials.
2. It integrates cutting, slider mounting and gapping together, improve efficiency highly.
3. It is suitable for luggage and bedding zippers.

pls check the below picture

Metal Zipper Manufacturing for Bag

Metal Zipper Manufacturing for Bag

Step 1: Gapping

Automatic Metal Zipper Gapping Machine

1-Model No.: QLQ-MDGM-1
2-Output: 2500PCS/60CM/H
3-Power: 380V,50HZ,3PH,2.2KW
4-Machine size: 1.95*0.80*1.90M
5-Packing size: 1.50*0.90*1.70M
6-N.W.: 420KG, G.W.: 490KG

Note: 1) Using the gapping mould of two sides and 2 hooked needles so that the teeth of top stop side will not be destroyed and no need to clean the half teeth.
2)By adopting touch screen control, customers can adjust the machine gapping speed and gapping length optionally.
3) This machine is with double choice of computer and hooked needle gapping, so that the gapping length is more accurate.
4) We have long model and short model for this gapping machine. Long model result is more accurately than short model for making the zipper length between 15CM-100CM. But for the size short 15CM and long than 100CM, the result of long model and short model are similary. But long model has other one modify function because it is with hooked needle gapping construction. For example: if zipper length has been made to be 17CM instead of 16cm by mistake, zipper can be modified again to be 16CM by clean 1CM teeth. Therefore if customer has enough place to put long model gapping machine, we advise customer to buy long model.

Zipper Cutting and Slider Mounting

Zipper Cutting and Slider Mounting

Plastic Zipper Manufacturing For Bag

Plastic Zipper Manufacturing For Bag

Step 1: Gapping

Automatic Metal Zipper Gapping Machine (long model)

1-Model No.: QLQ-DGM

2-Output: 3000PCS/60CM/H

3-Power: 380V,50HZ,3PH,2.2KW

4-M/C size: 1.52*0.78*2.10M

5-Packing size: 0.92*0.88*1.80M

6-N.W.: 320KG, G.W.: 400KG

 

Automatic Metal Zipper Gapping Machine (long model)
 

1) Gapping speed is fast and gapping length is accurate. 2)By adopting touch screen control, customers can adjust the machine gapping speed and gapping empty length optionally. 3) This machine can remove the teeth cleanly, there is no half teeth left on zippers. 4)This machine doesn't adopts hooked needle for locating, it adopts teeth accounting system to make zipper gapping.

 

Zipper Cutting and Slider Mounting

 

1) Gapping speed is fast and gapping length is accurate. 2)By adopting touch screen control, customers can adjust the machine gapping speed and gapping empty length optionally. 3) This machine can remove the teeth cleanly, there is no half teeth left on zippers. 4)This machine doesn't adopts hooked needle for locating, it adopts teeth accounting system to make zipper gapping.

المقال التالي
How to make Bed Sheet Zipper

اترك تعليق

الاسم
البريد الإلكتروني
التعليقات